Next Start

December 9th

WELDING SCHOOL NEAR ANAHEIM, CA: GET CAREER-READY

WELDING SCHOOL NEAR ANAHEIM, CA

Take 60 seconds and find out how you can get trained.
Downward arrowIcon indicating a downward direction

Universal Technical Institute’s (UTI) Long Beach, CA auto mechanic school is just three miles away from Lakewood, CA! The hands-on auto school offers an industry-aligned curriculum that helps equip students with the skills needed to pursue entry-level roles in the field.1 Read on to learn more!

WELDING COURSES OFFERED

Welding school students take the following courses:

  • Introduction to Welding, Safety and Careers
  • Principles of Welding
  • Gas Metal Arc Welding I (GMAW)
  • Shielded Metal Arc Welding I (SMAW)
  • Engineering and Fabrication
  • Gas Metal Arc Welding II (GMAW)
  • Shielded Metal Arc Welding II (SMAW)
  • Flux-Cored Arc Welding (FCAW)
  • Gas Tungsten Arc Welding (GTAW)
  • Pipe Welding
  • Welding Applications I (GMAW & FCAW)
  • Welding Applications II (SMAW & GTAW)

CAREER OPPORTUNITIES NEAR ANAHEIM, CA

According to the Bureau of Labor Statistics (BLS), the median annual salary for welders, cutters, solderers and brazers in the United States was $48,940 in May 2023.26 This means half earned more and half earned less. Keep in mind that salary depends on several factors, including experience, employer, demand and cost of living in the area.

Welding skills are in demand in California and across the nation. Per the BLS, aging infrastructure will necessitate the assistance of welders to rebuild bridges, highways and buildings.

Since fundamental welding skills are often transferrable across industries, welders may be able to move from one industry to another depending on the current demand for their services. For instance, a welder with expertise in construction may be able to shift to the manufacturing or shipbuilding sector!1

WELDING JOBS IN ANAHEIM, CA

Welding training graduates can begin pursuing entry-level careers. Some common entry-level roles include welding technicians, fabrication welders and welder fitters.

While most of our grads start out working as entry-level welders or in other entry-level roles, as with any industry, over time, you may be able to advance in your career with hard work. Some welding school students set their goals early on, hoping to advance into more senior roles as certified welding inspectors, quality controllers, or project managers later in their careers.77

Learn more about advanced welding roles by visiting our welding career guide!

It’s important to note that the career opportunities mentioned may not be immediately available in Anaheim, CA, upon graduation. Worry not, though – UTI's Career Services department is dedicated to helping graduates look for suitable opportunities in their area and beyond.

DIRECTIONS FROM ANAHEIM, CA, TO UTI LONG BEACH

Get to our Long Beach, CA welding school from Anaheim by following these steps:

1. Get on the I-5 N toward from W Broadway. (1.8 miles)
a) Drive south on S Anaheim Blvd toward Lincoln Ave. (0.2 miles)
b) Turn right onto W Broadway. (1 mile)
c) Turn right onto S Manchester Ave. (0.3 miles)
d) Turn right onto Lincoln Ave. (0.2 miles)
e) Turn right to merge onto I-5 N toward Los Angeles. (0.1 miles)
2. Take CA-91 W/State Hwy 91 W to Clark Ave in Bellflower. Take Exit 15B from CA-91 W/State Hwy 91 W. (12.6 miles)
a) Merge onto I-5 N. (2.7 miles)
b) Take Exit 113C to merge onto CA-91 W/State Hwy 91 W. (9.7 miles)
c) Take Exit 15B for Clark Ave. (0.2 miles)
3. Continue on Clark Ave to your destination in Long Beach. (4.4 miles)
a) Turn left onto Clark Ave. (3.6 miles)
b) Turn right onto E Contant St. (0.7 miles)
c) Turn right onto Worsham Ave. (213 feet)
d) Take the next right. (79 feet)
e) Take the next left, and our campus will be on the right. (66 feet)

UTI LONG BEACH CAMPUS LOCATION

4175 East Conant Street

Long Beach, California 90808

M-F | 8am-5pm | Hours

Campus Tours

TU&TH | 10am,2pm,6pm

W | 10am & 2pm

F&SAT | 10am & 1pm

562-541-7000 | Campus

800-834-7308 | Admissions

* If you wish to post a job please click here.

Automotive Technician School

UTI’s automotive technician school practices a blended learning model of instructor-led online training and hands-on application to model the continued on-the-job training graduates may encounter in the field.1 The 51-week program helps prepare students to test for ASE certification after graduation and allows them to earn Associate of Occupational Studies degrees!7

Collision Repair Technician School

The 51- to 54-week collision repair technician school offers hands-on courses in panel repair, paint fundamentals, damage analysis and more. Graduates can receive valuable I-CAR credentials, a diploma, and the knowledge needed to pursue entry-level roles as technicians, estimators, inspectors or appraisers!1

Diesel Technician School

Like the auto school, our diesel technician school uses a blended learning model meant to resemble the type of training entry-level technicians receive in the field.1 The 45-week program also prepares students to take ASE certification exams after they graduate. After graduation, they receive a diploma and can begin seeking out entry-level diesel tech careers!

Airframe and Powerplant Technician School

Our 18-month Airframe and Powerplant Technician School is designed to prepare students for entry-level roles in the aviation industry as aviation, turbine or field technicians.79 Students learn to maintain and troubleshoot various types of aircraft and receive a diploma as proof of their training!

ATTEND WELDING SCHOOL AT UTI

UTI’s state-of-the-industry welding school can help prepare you for your future! Take one of these first steps today: