WELDING SCHOOL NEAR RIVERSIDE, CA

Students receive instruction in classrooms and labs outfitted with industry-standard equipment at Universal Technical Institute's Rancho Cucamonga, CA, welding school. Graduates of UTI Rancho Cucamonga’s 36-week welding school can pursue welding careers after graduation!¹

UTI’s 36-week Welding Technology program provides hands-on welding training in four major welding processes, including:

• Gas metal arc welding (GMAW)
• Shielded metal arc welding (SMAW)
• Flux-cored arc welding (FCAW)
• Gas tungsten arc welding (GTAW)

Our welding courses allow students to hone their skills and put their problem-solving abilities to the test. To get the most out of this educational experience, participants must be curious and determined!

Skilled welders are in demand. The Bureau of Labor Statistics (BLS) predicts there will be more than 45,000 estimated average annual welding job openings in the United States.⁴²

According to the BLS, the median annual salary for welders, cutters, solderers and brazers in the U.S. was $48,940 in May 2023.²⁶ This means half earned more and half earned less. Keep in mind that salary depends on several factors, including experience, employer, demand and the cost of living in the area.

Follow these steps to get to Universal Technical Institute’s welding school in Rancho Cucamonga:

1. Get on CA-60 West from Market Street (1.9 miles)
1. Head northwest (39 feet)
2. Turn right toward 9th Street (135 feet)
3. Turn left onto 9th Street (220 feet)
4. Turn right onto Market Street
5. Slight left to merge onto CA-60 West toward Los Angeles (0.2 miles)
2. Continue on CA-60 West to Ontario. Take exit 56 from I-10 West (15.0 miles)
1. Merge onto CA-60 West (9.6 miles)
2. Use the right two lanes to take exit 41B to merge onto I-15 North toward Barstow (2.9 miles)
3. Use the right two lanes to take exit 109 to merge onto I-10 West toward Los Angeles (Parts of this road may be
4. closed at certain times or days) (2.2 miles)
5. Take exit 56 for Haven Avenue (0.2 miles)
3. Continue on North Haven Avenue to your destination in Rancho Cucamonga (1.3 miles)
1. Use the right two lanes to turn right onto North Haven Avenue (1.1 miles)
2. Use the left lane to turn left onto 6th Street (0.1 miles)
3. Turn left (197 feet)
4. Turn left (479 feet)

Fastest route may change depending on most recent traffic conditions.

Automotive Technology students at UTI Rancho Cucamonga can earn associate of occupational studies (AOS) degrees after completing hands-on automotive training in 51 weeks by learning how to diagnose, repair and maintain automotive technologies.^7,18

Students can get 45-week training at UTI Rancho Cucamonga’s Diesel Technology program and earn diplomas after learning how to diagnose, maintain and repair diesel technologies.⁷

UTI Rancho Cucamonga’s students in the 30-week Wind Turbine Technician program have the chance to earn diplomas and gain the hands-on skills needed to pursue careers in this industry.¹

Graduates of the Industrial Maintenance Technician program at UTI Rancho Cucamonga can earn diplomas and feel prepared for entry-level careers as industrial maintenance technicians after completing the 30-week training.¹

Students can earn diplomas after completing the 51-week robotics and automation program at UTI Rancho Cucamonga, where they learn in-demand industry skills.