Next Start

June 23

WELDING SCHOOL NEAR POMONA, CA

A New Career Path Starts Here

Take 60 seconds and find out how you can get trained.
Downward arrowIcon indicating a downward direction

Put an end to “welding school near me” searches. Universal Technical Institute (UTI) offers a Welding Technology program just outside Pomona, CA. Students participate in practical, hands-on training in a setting that closely mirrors real-world conditions, helping prepare them to pursue entry-level roles after graduation.1

WELDING TRAINING NEAR POMONA, CA

UTI’s welding training near Pomona is in Rancho Cucamonga and can take just 36 weeks to complete. Our Rancho Cucamonga, CA, welding school teaches students the fundamentals of combination welding through hands-on courses that cover the four primary arc welding processes: gas metal arc welding (GMAW), gas tungsten arc welding (GTAW), flux-cored arc welding (FCAW) and shielded metal arc welding (SMAW).

UTI’s welding courses were designed in collaboration with Lincoln Electric – a manufacturing and design leader in welding technology. Our industry-aligned instruction is enhanced by the technologies and tools students practice with. Students use virtual VRTEX® welders before graduating to actual equipment, so they can practice adjusting their techniques as necessary to produce neat and accurate welds.

WELDING COURSES OFFERED

The welding school at UTI builds students’ knowledge from the ground up through the following welding courses:

  • Introduction to Welding, Safety and Careers
  • Principles of Welding
  • Gas Metal Arc Welding I (GMAW-1)
  • Shielded Metal Arc Welding I (SMAW-1)
  • Engineering and Fabrication
  • Gas Metal Arc Welding II (GMAW-2)
  • Shielded Metal Arc Welding II (SMAW-2)
  • Flux-Cored Arc Welding (FCAW)
  • Gas Tungsten Arc Welding (GTAW)
  • Pipe Welding
  • Welding Applications I (GMAW & FCAW)
  • Welding Applications II (SMAW & GTAW)

CAREER OPPORTUNITIES NEAR POMONA, CA

According to the Bureau of Labor Statistics (BLS) report, the median annual salary for welders, solderers, cutters and brazers in the United States was $48,940 in May 2023.26 This means half earned more and half earned less. Keep in mind that salary depends on several factors, including experience, employer, demand and cost of living in the area.

Welding is an exciting path to pursue in California and beyond. The BLS expects national welding employment to exceed 463,000 by 2033!50

WELDING JOBS NEAR POMONA, CA

Most of our welding school graduates are prepared to begin their careers in entry-level welding positions, which may include:

  • Welder
  • Fabrication welder
  • Welder fitter

As with any field, experienced welders may have the opportunity to progress in their careers through experience and hard work. Some advanced welding roles could include:77

  • Inspector
  • Quality controller
  • Welding project manager

Many industries demand welding skills. Learn more about welding career paths by checking out our career guide. However, bear in mind that the positions available in Pomona might vary based on current regional and industry needs. Graduates who need help looking for opportunities can reach out to UTI's Career Services department.1

DIRECTIONS FROM POMONA, CA, TO UTI RANCHO CUCAMONGA

Our welding school is about 13.5 miles from Pomona. Follow these steps to get to UTI Rancho Cucamonga:

  1. Get on I-10 East. (2.3 miles)
    1. Head east on East Mission Blvd toward South Locust Street. (0.5 miles)
    2. Turn left onto South Towne Avenue. (1.6 miles)
    3. Turn right to merge onto I-10 East. (0.2 miles)
  2. Follow I-10 East to North Archibald Avenue in Ontario. Take Exit 55 from I-10 East. (8.8 miles)
    1. Merge onto I-10 East. (8.4 miles)
    2. Take Exit 55 for Archibald Avenue. (0.4 miles)
  3. Follow North Archibald Avenue and 6th Street to UTI Rancho Cucamonga. (2.3 miles)
    1. Use any lane to turn left onto North Archibald Avenue. (1.2 miles)
    2. Turn right onto 6th Street. (0.9 miles)
    3. Turn left. (197 feet)
    4. Turn left. (479 feet)
  4. Fastest route may change depending on most recent traffic conditions.

UTI RANCHO CUCAMONGA CAMPUS LOCATION

9494 Haven Avenue

Rancho Cucamonga, California 91730

M-F | 8am-5pm | Hours

Campus Tours

TU&TH | 10am,2pm,6pm

W | 10am & 2pm

909-484-1929 | Campus

800-834-7308 | Admissions

* If you wish to post a job please click here.

PROGRAMS OFFERED AT UTI RANCHO CUCAMONGA

In addition to welding training, UTI Rancho Cucamonga offers automotive, diesel, wind turbine, robotics and automation, and industrial maintenance training.

Auto Mechanic Training

Train toward an associate of occupational studies (AOS) degree and prepare to test for ASE certification with UTI’s 51-week Automotive Technology training program.7 The program teaches students to maintain and repair vehicles, providing them with hands-on training they need to start seeking out entry-level roles, which may include automotive technician, smog inspector, parts associate or service writer.18,77

Diesel Mechanic Training

UTI's Diesel Technology program is designed to last 45 weeks.7 Graduates earn diplomas and the knowledge important to testing for ASE certification. The program also prepares students for entry-level diesel technician positions across various industries, including transportation, agriculture and power generation.

Industrial Maintenance Technician Training

UTI’s 30-week Industrial Maintenance Technician training program helps prepare students for roles in the power generation and manufacturing sectors. No previous experience is required. Committed instructors help students build their skills from the ground up, preparing them to maintain, troubleshoot and repair complex machinery within these industries.

Robotics & Automation Technician Training

During the 51-week Robotics & Automation Technician training program, students develop foundational knowledge in 3D printing, computer-aided design, C programming and more, readying them for entry-level positions in an advancing field.

Wind Turbine Technician Training

If you're interested in pursuing a career in the renewable energy sector, the Wind Turbine Technician program at UTI can help. Our 30-week program encompasses a variety of subjects, including turbine operation, climb and rescue techniques and renewable energy fundamentals, equipping students with the skills they need to pursue a thrilling career.

LEARN TO WELD NEAR POMONA, CA

Our Rancho Cucamonga welding school professionals are enthusiastic about helping you achieve your aspirations. Through mentorship from dedicated instructors, graduates acquire the essential skills to seek entry-level positions in less than nine months. If you're interested in learning more, request information and one of our Admissions Representatives will contact you!

1) UTI is an educational institution and cannot guarantee employment or salary.2) For program outcome information and other disclosures, visit www.uti.edu/disclosures.7) Some programs may require longer than one year to complete.18) UTI now offers all of its automotive, diesel, motorcycle and marine technician training in a blended-learning format consisting of online lecture courses along with in-person, hands-on lab training.26) UTI’s Welding Technology Training Program prepares graduates for entry-level positions using the provided training, primarily as welders. Estimated annual salary shown above is for Welders, Cutters, Solderers, and Brazers as published in the U.S. Bureau of Labor Statistics’ May 2023 Occupational Employment and Wages. Entry-level salaries are lower for graduates. UTI is an educational institution and cannot guarantee employment or salary. Graduates’ achievements may vary. Individual circumstances and wages depend on economic factors, personal credentials, work experience, industry certifications, the location of the employer, and their compensation programs. Some UTI graduates get jobs within their field of study in positions other than as a welding technician, such as inspector and quality control. Salary information for the Commonwealth of Massachusetts: The average annual entry-level salary range for persons employed as Welders, Cutters, Solderers, and Brazers (51-4121) in the Commonwealth of Massachusetts is $40,060 (Massachusetts Labor and Workforce Development, May 2022 data https://lmi.dua.eol.mass.gov/lmi/OccupationalEmploymentAndWageAllIndustries/OEWResult?A=01&GA=000025&OG=514121&Dopt=TEXT). Salary information for North Carolina: The U.S. Department of Labor estimates the hourly median wage for skilled welders in North Carolina is $23.38 (Bureau of Labor Statistics, U.S. Department of Labor, May 2023 Occupational Employment and Wages, Welders, Cutters, Solderers, and Brazers). The Bureau of Labor Statistics does not publish entry-level salary data. However, the 25th and 10th percentile of hourly earnings in North Carolina are $20.82 and $18.17, respectively.50) The U.S. Bureau of Labor Statistics projects that total national employment for Welders, Cutters, Solderers, and Brazers will be 463,800 by 2033. See Table 1.2 Occupational projections, 2023–33, and worker characteristics, 2023, U.S. Bureau of Labor Statistics, www.bls.gov, viewed November 4, 2024. UTI is an educational institution and cannot guarantee employment or salary.77) UTI is an educational institution and cannot guarantee employment or salary. UTI prepares graduates for entry-level careers using the provided training. UTI graduates’ achievements may vary. Some UTI graduates get jobs within their field of study in positions other than those listed.

Universal Technical Institute of Illinois, Inc. is approved by the Division of Private Business and Vocational Schools of the Illinois Board of Higher Education.

*Registration Fee Waiver will apply to any student who enrolls by July 31, 2025, with a start date between March 31, 2025, and September 25, 2025.

Privacy PolicyLegal NoticeAccessibilityDisclosures

Do Not Sell My Personal Information