WELDING SCHOOL NEAR WESTON, FL

WELDING SCHOOL NEAR WESTON, FL

Take 60 seconds and find out how you can get trained.

Step 1 of 2

Downward arrowIcon indicating a downward direction

Are you looking for hands-on welding training near Weston, Florida? Universal Technical Institute has teamed with industry-leader Lincoln Electric to provide training that aligns with current processes, regulations and production protocols. Continue reading to learn more about UTI Miramar’s welding school near Weston.

WELDING TRAINING NEAR WESTON, FL

UTI’s Welding training program in Miramar, FL, can be completed in less than nine months. The campus is located only about 13 miles south of Weston.

The program helps prepare students to pursue welding careers in various industries1 by teaching four main arc welding processes — gas metal arc welding (GMAW), shielded metal arc welding (SMAW), flux-cored arc welding (FCAW) and gas tungsten arc welding (GTAW). Students also learn to weld in the flat, vertical, horizontal, overhead, fixed and rolling positions.

At the end of 36 weeks, welding school graduates can begin pursuing entry-level roles, including as fabrication welders and welder fitters.77

WELDING COURSES OFFERED

UTI’s welding courses are evidence of its comprehensive curriculum. Welding school courses include:

  • Introduction to Welding, Safety and Careers
  • Principles of Welding
  • Gas Metal Arc Welding I and II (GMAW)
  • Shielded Metal Arc Welding I and II (SMAW)
  • Engineering and Fabrication
  • Flux-Cored Arc Welding (FCAW)
  • Pipe Welding
  • Welding Applications I and II
  • Gas Tungsten Arc Welding (GTAW)

Not only will students learn various welding processes and positions, but they will also learn safety standards, measurement, project planning, blueprint reading, code interpretation, standard terminology and more.

CAREER OPPORTUNITIES NEAR WESTON, FL

According to the Bureau of Labor Statistics (BLS), the median annual salary for welders, cutters, solderers and brazers in the United States was $48,940 in May 2023.26 This means half earned more and half earned less. Keep in mind that salary depends on several factors, including experience, employer, demand and cost of living in the area.

A welding career can be exciting for self-starters who enjoy learning, problem-solving and opportunities to be creative. Several industries rely on welders to help them stay running, and the career path leaves room for transitioning across industries and trying new work environments.

There’s a demand for skilled welders. In fact, more than 42,000 estimated average annual welding job openings are expected in the United States.42

WELDING JOBS IN WESTON, FL

Some of our welding training graduates start out in one of the following entry-level roles:

  • Fabrication weldersweld, cut, shape and finish raw materials to create products commonly used in the transportation and infrastructure industries.
  • Welder fittersrely on blueprints to help them gather and assemble materials and tools needed for welding projects.
  • Welders use a variety of welding processes and techniques to join metal pieces together for specific projects.

While most of our grads start out in entry-level roles like these, as with any industry, over time, you may be able to advance in your career with hard work.77 A couple of advanced welding roles could include:

  • Welding inspectorsexamine welds for visual and structural imperfections like fractures, undercuts and spatter. They also schedule mechanical testing sessions, verify welding specifications and compile reports.
  • Welding project managersoversee projects from start to finish, guaranteeing the whole process runs smoothly. This can include defining the project and its schedule, sticking to a budget and enforcing safety standards.

While the welding positions mentioned above are popular paths to pursue, they may not be currently available in Weston. If you have any questions or need further information regarding the types of welding careers available in your area, please don't hesitate to reach out to our Career Services team.1

DIRECTIONS FROM WESTON, FL, TO UTI MIRAMAR

UTI Miramar’s welding school is approximately 13 miles from Weston. Please note that this route requires restricted-usage roads. To get to our campus, follow these directions:

  1. Get on I-75 South in Davie from Weston Hills Drive and Royal Palm Boulevard (4.3 miles)
    • Head northwest on Eagle Run Drive toward Golf View Drive (108 feet)
    • Turn left onto Golf View Drive (0.5 miles)
    • Turn left onto Weston Hills Drive (0.9 miles)
    • Turn left onto Weston Hills Boulevard (0.8 miles)
    • Turn right onto Royal Palm Boulevard (1.3 mi)
    • Keep right at the fork, follow signs for I-75 South/Miami and merge onto I-75 South (0.7 miles)
  2. Continue on I-75 South to Miramar. Take Exit 7 from I-75 South (7.9 miles)
    • Merge onto I-75 South (3.9 miles)
    • Keep right at the fork to stay on I-75 South (1.5 miles)
    • Take Exit 9A for Pines Boulevard/FL-820 East (0.3 miles)
    • Use any lane to turn right onto FL-820 East/Pines Boulevard (0.6 miles)
    • Turn right onto SW 145th Avenue (1.7 miles)
  3. Continue to the campus (0.1 miles)
    • Turn left (200 feet)
    • Turn right (397 feet)
    • Turn left, and UTI Miramar will be on your left (118 feet)

UTI MIRAMAR CAMPUS LOCATION

2601 SW 145th Avenue
    Miramar, FL 33027

M-F | 8am-5pm | Hours
Campus Tours
      TU&TH | 10am, 2pm, 6pm
      W | 10am & 1pm
      F&SAT | 10am & 1pm




754-946-5595 | Campus
800-834-7308 | Admissions
844-338-0033 | Financial Aid
407-232-5259 | Housing
866-609-6928 |  Student & Career Services

* If you wish to post a job please click here.

OTHER PROGRAMS OFFERED AT UTI MIRAMAR

Not sure about welding school? UTI also offers Diesel, Automotive, and Airframe & Powerplant technician training programs in Miramar.79

*Airframe & Powerplant program coming to UTI Miramar pending FAA approval.

Auto Mechanic School

UTI’s automotive mechanic school trains students to perform maintenance and diagnose and make repairs to various automobiles. A few course topics include Automotive Engines Service and Repair, Vehicle Brake Systems, Advanced Technology/Hybrid and Service Advising, Vehicle Electronic Systems and Technology, and more.

The 51-week program7 was created with the help of industry leaders, so students can build the entry-level skills many employers are looking for.1 During their studies, students train in classrooms and labs outfitted with the technology and tools seen in the field.

Upon graduating, many students pursue entry-level roles as automotive technicians, service writers and parts associates.77

Diesel Mechanic School

Experienced instructors lead the diesel mechanic school in Miramar and teach a curriculum developed with help from UTI’s industry relationships. From maintenance to diagnosis and repair, students train on various diesel engines and equipment.

The program is 45 weeks long7 and includes course topics like Diesel Engines Service & Repair, Diesel Truck Brake Systems & Chassis, Vehicle Electronic Systems and Technology, Diesel Truck Transport Refrigeration, and more.

Upon completion, students can pursue entry-level roles as diesel technicians, agriculture technicians and heavy equipment repair technicians.77

Airframe and Powerplant School

Our airframe and powerplant school79 is taught by experienced instructors in hands-on labs equipped with modern tools and technologies.

The 18-month program is designed to teach students to maintain, diagnose and repair various aircraft, helping them develop the skills employers often value in entry-level candidates.1

Upon graduating, students can pursue entry-level careers. Possible positions include aviation mechanic, turbine technician or field technician.77
(Program coming to UTI Miramar pending FAA approval.)

TRAIN FOR A WELDING CAREER AT UTI MIRAMAR NEAR WESTON, FL

Ready to discover the potential of a welding school education near Weston? UTI Miramar’s instructors, up-to-date welding courses, and Career Services can help equip you to pursue a career you’re excited about. Here are a few next steps you can take:

  • Schedule a campus tour to see the Welding program in action.
  • Request more info by clicking below to connect with an Admissions Representative.
  • Enroll today!