- Programs
- Locations
- Explore UTI
- Training & Admissions
- Support & Financial Aid
- Current Students & Alumni
- Employers & Partners
Universal Technical Institute has a welding school near Hollywood, Florida, that offers a curriculum designed around current industry practices and standards. During the program, students learn about safety standards, project planning and the types of careers they can pursue upon graduation.1 Learn more below!
WELDING TRAINING NEAR HOLLYWOOD, FL
UTI’s Miramar, FL, welding school is approximately 13 miles west of Hollywood. The 36-week Welding training program aims to help students understand the procedures and equipment used in the industry.
Students learn four main arc welding processes — gas metal arc welding (GMAW), shielded metal arc welding (SMAW), flux-cored arc welding (FCAW) and gas tungsten arc welding (GTAW).
Guided by experienced instructors, students train using state-of-the-industry tools and equipment, helping prepare them to pursue roles in the field.
WELDING COURSES OFFERED
Students at the UTI Miramar welding school take courses that include:
- Introduction to Welding, Safety and Careers
- Principles of Welding
- Gas Metal Arc Welding I and II (GMAW)
- Shielded Metal Arc Welding I and II (SMAW)
- Engineering and Fabrication
- Flux-Cored Arc Welding (FCAW)
- Pipe Welding
- Welding Applications I and II
- Gas Tungsten Arc Welding (GTAW)
Upon completion of these welding courses, UTI Miramar graduates are presented with diplomas!
CAREER OPPORTUNITIES NEAR HOLLYWOOD, FL
Welding can be a great career for detail-oriented people who aren’t afraid to roll up their sleeves and solve problems. Welding can also be a good choice for those who consider themselves lifelong learners.
Several industries employ skilled welders. From shipyards to robotics factories, this career path leaves plenty of room for trying new things. But what about salary?
According to the Bureau of Labor Statistics (BLS), the median annual salary for welders, cutters, solderers and brazers in the United States was $48,940 in May 2023.26 This means half earned more and half earned less. Keep in mind that salary depends on several factors, including experience, employer, demand and cost of living in the area.
WELDING JOBS IN HOLLYWOOD, FL
Most of our grads start out as entry-level technicians or in other entry-level roles as fabrication welders or welder fitters. As with any industry, over time, you may be able to advance in your career with hard work. Popular welding careers that those with advanced skills could pursue include:77
- Manufacturing welding:These types of welders build products from metal and can work in various industries, such as mining, agriculture and construction.
- Boatyard welding: Shipbuilding and boat-building welders create, assess and restore welds on ships, research vessels, and cargo boats. They typically are under contract and can travel from port to port internationally.
While the above entry-level and advanced welding paths can be exciting opportunities to pursue, keep in mind that the availability of each role is linked to the demand of the local area.
DIRECTIONS FROM HOLLYWOOD, FL, TO UTI MIRAMAR
UTI Miramar’s welding school is about 13.5 miles west of Hollywood, and the route there is simple:
- Drive east on Hollywood Boulevard toward North Dixie Highway (62 feet)
- Turn right at the first cross street onto South Dixie Highway (1 mile)
- Turn right onto State Highway 824/West Pembroke Road (11.7 miles)
- Turn left onto SW 145th Avenue (0.6 miles)
- Turn left (200 feet)
- Take the next right (397 feet)
- Turn left, and the campus will be to your left (118 feet)
UTI MIRAMAR CAMPUS LOCATION
2601 SW 145th Avenue
Miramar, Florida 33027
M-F | 8am-5pm | Hours
754-946-5595 | Campus
800-834-7308 | Admissions
844-338-0033 | Financial Aid
407-232-5259 | Housing
* If you wish to post a job please click here.
OTHER PROGRAMS OFFERED AT UTI MIRAMAR
Interested in the trades but not sure welding training is for you? Check out other programs offered at UTI Miramar.
Automotive Technician School
UTI Miramar’s automotive technician school is a 51-week program1 that equips students with the skills needed to maintain, diagnose and repair automobiles and their components using current industry technology.
After completing their core automotive studies, eligible students can pursue one of our automotive Manufacturer-Specific Advanced Training programs found at other UTI campuses nationwide, or start pursuing entry-level careers in the industry.
Diesel Technician School
UTI Miramar’s diesel technician school is a 45-week program7 designed to give students the skills they need to confidently pursue entry-level roles in this field.
Developed with assistance from industry professionals, the program provides students with hands-on training18 on diesel engines and equipment seen in the field. Upon graduation, participants will be able to maintain, diagnose, repair and test various diesel engines and components. And students can choose to further their education by applying for specialized diesel training programs found at other UTI campuses across the nation.
Others go on to pursue entry-level careers as diesel technicians, heavy equipment repair technicians, or power generation technicians.77
Airframe and Powerplant Mechanic School
UTI Miramar’s airframe and powerplant school79 has been designed to be an 18-month program that doesn’t require any previous experience to attend.
Students receive hands-on training from experienced instructors who help them develop the skills many employers look for in entry-level candidates.1 Courses include Reciprocating Engine Inspection and Overhaul, Powerplant Lubrication and Propellers, Turbine Designs and Operations, and more.
Upon graduation, students can pursue entry-level aviation mechanic roles.
START WELDING TRAINING AT UTI NEAR HOLLYWOOD, FL
Take the first step toward an exciting future by enrolling in the Welding training program at UTI Miramar. Not quite ready to enroll? Request more info by clicking below, and we’ll connect you with an Admissions Representative who can answer any questions you may have!